А.В. Руссу, В.А. Шамаев, Е.М. Разиньков, Андрис Зимелис
Скачать
№ 1 (49)
Деревопереработка. Химические технологии
Предложен способ аппроксимации внутреннего трения древесины на основе принципа суперпозиции Больцмана, описывающего сложное вязкоупругое поведение системы линейной комбинацией компонентов. На подготовленные образцы натуральной и модифицированной древесины, выпиленные из стволовой части деревьев березы повислой (Betula pendula Roth), произраставших в Хлевенском Лесхозе (52.184130, 39.110463, НУМ 157м), воздействовали в радиальном и тангенциальном направлениях ультразвуком (частота 24.5 кГц, экспозиция 0-20 минут, шаг 5 минут) и импульсным магнитным полем (напряженность – 0.3 Тл, экспозиция
0-2 минуты, шаг 0.5 минуты). Далее исследовали внутреннее трение образцов на экспериментальной установке методом логарифмического декремента затухания на основе свободно-изгибных колебаний. Получены при уровне значимости p=0.95 абсолютные величины безразмерного коэффициента вязкости κ, заложенного в модели, как основного структурного параметра для образцов натуральной и модифицированной древесины: для влажности от 4.3 до 15; для ультразвука 4.6 до 20; для импульсного магнитного поля от 3.6 до 7.7. Абсолютные величины безразмерных коэффициентов масштабирования μ для образцов из натуральной и модифицированной древесины принимают значение от 1.92 до 3.91. Наибольшая величина аппроксимации была достигнута при испытании образцов натуральной древесины березы повислой (Betula pendula Roth): R2=0.98 для радиального направления, влияние фактора влажности, и R2=0.85 – для тангенциального, влияние фактора ультразвука, а также для образца из модифицированной древесины марки «Дестам» в радиальном направлении R2=0.96, влияние фактора импульсного магнитного поля.
внутреннее трение древесины, натуральная и модифицированная древесина, береза повислая (Betula pendula Roth), принцип суперпозиции Больцмана, модифицирование, ультразвук, магнитное поле
Исследование внутреннего трения натуральной и модифицированной прессованием древесины березы повислой (Betula pendula Roth) / А. В. Руссу, В. А. Шамаев, Е. М. Разиньков, А. Зимелис // Лесотехнический журнал. – 2023. – Т. 13. – № 1 (49). – С. 236–256. – Библиогр.: с. 252–256 (31назв.). – DOI: https://doi.org/10.34220/issn.2222-7962/2023.1/16.
-
Cai C., Zhou F. Sorption characteristic of thermally modified wood at varying relative humidity. Forests. 2022; 13(10):1687.DOI:https://doi.org/10.3390/f13101687
-
Ali M. R., Abdullah U. H. Hydrothermal modification of wood: A review. Polymers.2021; 13(16): 2612. DOI: https://doi.org/10.3390/polym13162612.
-
Romano A., Cappellin L. Exploring volatile organic compound emission from thermally modified wood by PTR-ToF-MS. Analyst. 2022;147 (22): 5138-5148. DOI: http://dx.doi.org/10.1039/D2AN01376B
-
Wang Y., Zhang R. Improvement on dimensional stability and mold resistance of wood modified by tannin acid and tung oil.Holzforschung. 2022; 76 (10): 929-940. DOI: https://doi.org/10.1515/hf-2022-0062
-
Hu J. Manufacturing and characterization of modified wood with in situ polymerization and Cross-Linking of Water-Soluble Monomers on Wood Cell Walls. Polymers. 2022; 14(16):3299. DOI: https://doi.org/10.3390/polym14163299
-
Bytner O., Laskowska A. Evaluation of the dimensional stability of black poplar wood modified thermally in nitrogen atmosphere. Materials. 2021; 14(6): 1491. DOI: http://dx.doi.org/10.3390/ma14061491
-
Shukla S. R. Evaluation of dimensional stability, surface roughness, colour, flexural properties and decay resistance of thermally modified Acacia auriculiformis.MaderasCiencia y Tecnologia. 2019; 21(4): 433-446. DOI: http://dx.doi.org/10.4067/S0718-221X2019005000401
-
Youming D., Silong G. The effect mechanism and properties of poplar wood cross-linking modified with polyols and polycarboxylic acid. Wood Material Science & Engineering. 2023; 1(18): 1-11. DOI: http://dx.doi.org/10.1080/17480272.2023.2167110
-
Mohebby B., Broushakian V. Moisture induced stresses in cross laminated timber (CLT) made from hydrothermally modified wood. Eur.J.WoodProd. 2022; 80: 1087–1094. DOI: https://doi.org/10.1007/s00107-022-01836-0
-
Thais M.B., Glaucileide F. Resistance to biodeterioration of thermally modified Eucalyptus grandis and Tectonagrandis short-rotation wood. Wood Material Science & Engineering. 2022; 11 (26): 1-8. DOI: http://dx.doi.org/10.1080/17480272.2022.2150985
-
Plaza N.Z.,Pingali S.V., Ibach R.E. Nanostructuralchanges correlated to decay resistance of chemically modified wood fibers. Fibers. 2022; 10(5):40. DOI: https://doi.org/10.3390/fib10050040
-
Kurkowiak K., Wu M., Emmerich L. Fire-retardant properties of wood modified with sorbitol, citric acid and a phosphorous-based system. Holzforschung.2023; 77(1): 38-44. DOI: https://doi.org/10.1515/hf-2022-0114
-
Sikora A., Hajkova K., Jurczykova T. Degradation of chemical components of thermally modified robiniapseudoacacia L. wood and Its effect on the change in mechanical properties. International Journal of Molecular Sciences. 2022; 23(24):15652. DOI: https://doi.org/10.3390/ijms232415652
-
Nisrina P.H., Resa M., Istie S.R. Surface characterization and paint bonding quality on chemically and thermally modified short rotation teak wood. International Wood Products Journal. 2022; 11 (8): 1-8. DOI: http://dx.doi.org/10.1080/20426445.2022.2138908
-
Cambazoglu M., Tomak E.D., Ermeydan M.A. Natural weathering of spruce wood chemically modified by reused-caprolactone solution. Coloration Technology. 2022; 10 (4): 17-28. DOI https://doi.org/10.1111/cote.12645
-
Miklecic J., Loncaric A., Veselicic N.,Jirous-Rajkovic V. Influence of wood surface preparation on roughness, wettability and coating adhesion of unmodified and thermally modified wood. Drvnaindustrija.2022; 73 (3): 261-269. DOI: https://doi.org/10.5552/drvind.2022.0016
-
Juncheng L., Wei W., Haolin W. Prediction of thermal modified wood color change after artificial weathering based on IPSO-SVM model.Research Square.2022; 11: 1-17. DOI: http://dx.doi.org/10.21203/rs.3.rs-2327397/v1
-
Kymalainen M., Domeny J., Rautkari L. Moisture sorption of wood surfaces modified by one-sided carbonization as an alternative to traditional facade coatings. Coatings. 2022; 12(9):1273. DOI: https://doi.org/10.3390/coatings12091273
-
Buchelt B., Kruger R.,Wagenfuhr, A. The vibrational properties of native and thermally modified wood in dependence on its moisture content. Eur. J. Wood Prod. (2023); 1(13): 1-8. DOI: https://doi.org/10.1007/s00107-022-01919-y
-
Chen X., Ge-Zhang S., Han Y. Ultraviolet-assisted modified delignified wood with high transparency. Applied Sciences. 2022; 12(15):7406. DOI: https://doi.org/10.3390/app12157406
-
Liu Y., Avramidis S. Air permeability of thermally modified hemlock wood. Les/Wood.2022; 71(2): 25–30. DOI: https://doi.org/10.26614/les-wood.2022.v71n02a01
-
Tomov G. Reduction of Electricity Consumption in the Production of Thermally Modified Wood. 2022 22nd International Symposium on Electrical Apparatus and Technologies (SIELA), Bourgas, Bulgaria. 2022;1:1-6.DOI: http://dx.doi.org/10.1109/SIELA54794.2022.9845726
-
Bonfatti Junior E.A., Lengowski E.C., Nisgoski S. Properties of thermally modified woods by a Brazilian process. Environmental Sciences Proceedings. 2022; 22(1):24. DOI: https://doi.org/10.3390/IECF2022-13042
-
Aytin A., Cakicier, N. Weathering’s effect on color and roughness in some heat-treated wood species with modified water-based varnish. BioResources.(2022); 17(4): 6358-6376. DOI: http://dx.doi.org/10.15376/biores.17.4.6358-6376
-
Roberts G., Campbell S., Graham A. The environmental and social impacts of modified wood production: effect of timber sourcing. International Wood Products Journal. 2022; 13(4): 236-254. DOI: http://dx.doi.org/10.1080/20426445.2022.2117923
-
Mamonova M., Ciglian D., Reinprecht L. SEM analysis of glued joints of thermally modified wood bonded with PUR and PVAc. Glues Materials. 2022; 15(18):6440. DOI: https://doi.org/10.3390/ma15186440
-
Chen Y., Wang W., Li N. Prediction of the equilibrium moisture content and specific gravity of thermally modified wood via an Aquila optimization algorithm back-propagation neural network model.BioResources. 2022; 17(3): 4816-4836. DOI: http://dx.doi.org/10.15376/biores.17.3.4816-4836 DOI: 10.15376/biores.17.3.4816-4836
-
Haftkhani A.R., Abdoli F., Rashidijouybari I. Prediction of water absorption and swelling of thermally modified fir wood by artificial neural network models. Eur. J. Wood Prod. 2022; 80: 1135–1150. DOI: https://doi.org/10.1007/s00107-022-01839-x
-
Nasir V., Nourian S., Avramidis S., Cool J. Stress wave evaluation for predicting the properties of thermally modified wood using neuro-fuzzy and neural network modeling. Holzforschung. 2019; 73(9), 827-838. DOI: http://dx.doi.org/10.1515/hf-2018-0289
-
Golovin, I. S., Cordero, F. Internal Friction and Mechanical Spectroscopy (IFMS-19). Concluding Remarks. Journal of Alloys and Compounds. 2023; 946, 169375. DOI: https://doi.org/10.1016/j.jallcom.2023.169375.
-
Патент № 2712521 C1 Российская Федерация, МПК B27K 5/06. Способ получения модифицированной древесины : № 2019103517 : заявл. 07.02.2019 :опубл. 29.01.2020 / В. А. Шамаев, И. Н. Медведев, Д. А. Паринов, О. Ф. Шишлов ; заявитель и патентообладатель Общество с ограниченной ответственностью "Модификация" – 8 с. Режим доступа: https://www.elibrary.ru/item.asp?id=42449800.